Views:信息来源：山东科大中天电子有限公司发布时间：2016/10/17Source of information: Shandong University of Science and Technology Zhongtian Electronics Co., Ltd.Release time: 2016/10/17
A repeater (RP repeater) is a connection device that works on the physical layer.It is suitable for the interconnection of two identical types of networks. The main function is to extend the distance of network transmission by resending or forwarding data signals. The repeater is a network device that regenerates and restores signals: the physics of the OSI model Layer equipment. Shandong Repeater由于存在损耗，在线路上传输的信号功率会逐渐衰减，衰减到一定程度时将造成信号失真，因此会导致接收错误。It is believed thatdue to the loss of therepeater, thepower of the signal transmitted on the line will gradually decay, and the signal will be distorted when it is attenuated to a certain extent, which will cause reception errors.Repeaters are designed to solve this problem.It completes the connection of physical lines, amplifies the attenuated signal, and keeps the same as the original data.Under normal circumstances, the two ends of the repeater are connected to the same media, but some repeaters can also complete the transfer of different media.In theory, the use of repeaters is unlimited, so the network can be extended indefinitely.In fact, this is impossible, because the delay range of the signal is specified in the network standards, and the repeater can only work effectively within this specified range, otherwise it will cause network failure. The Shandong repeater is the ** simple ** cheap network interconnection device used to extend the network distance in the LAN environment. It operates on the physical layer of the OSI. The repeater has the function of amplifying and regenerating the signals on the line. The length of the network segment (only used to connect to the same LAN segment). A repeater (RP repeater) is a device that connects network lines and is often used for two-way forwarding of physical signals between two network nodes.The repeater mainly completes the functions of the physical layer. It is responsible for transmitting information bit by bit on the physical layer of the two nodes, completing the signal replication, adjustment, and amplification functions to extend the length of the network. Shandong repeater manufacturers have won many The trust of customers, if you want to know more about the relevant knowledge, then call to consult it!